|
|
Build Your Online Product Catalogs?
| Product Name: |
2740 Glass Textile Sleeving With Acrylic Resin Based Coating
|
| Supply Ability: |
10million |
| Related proudcts |
acrylic sleeving, fiber sleeving, |
| Specifications |
1mm-50mm |
| Price Term: |
FOB |
| Port of loading: |
Shanghai |
| Minimum Order |
1000meter |
| Unit Price: |
0.032 |
|
2740 Glass Textile Sleeving With Acrylic Resin Based Coating
(In accordance with JB/T8151.3-1999, IEC60684-3-403:1988)
Glass textile sleeving with acrylic resin based coating is manufactured with non-alkali fiberglass braided sleeving and coated it with acrylate latex and then heated it to form B grade insulating sleeving.
It possesses outstanding property of dielectric, reliable heat resistance and elasticity, benzene resistance and oil resistance.
It can be used as wiring insulation and mechanic protection for electrical machinery, electric apparatus, electric appliances, etc.
Length: The standard length of this sleeving is 1000mm, continuous length could be negotiated.
Appearance: Smooth surface, clear and neat ends.
Elasticity:
1. At 20¡À5℃ and 65¡À5%(RH), the coating of the sleeving should not crack or appear ***ached after the sleeving has been wound around the specified mandrel for 1 hour.
2.The coating should not crack or appear ***ached after the sleeving has been treated for 2 hours at a temperature of 10℃ to 15℃ below zero.
3.After the sleeving has been treated at a temperature of 130¡À2℃ for 24 hours and then wound around a specified mandrel at the room temperature of 20¡À2℃, the coating should not crack or appear ***ached.
Oil resistance: The coating should not crack or appear ***ached after the sleeving has been dipped in transformer oil for 24 hours at a temperature of 105¡À2℃,but the colour of the sleeving grow darker is allowed.
Benzene resistance: The coating should not be sticky or show delaminating when the sleeving keep in methyl benzene at a normal atmospheric temperature for 4 hours.
Note: The breakdown voltage for the sleeving which inner diameter is or below 1.5mm, should not be lower than 75% of the specified voltage.
|
| Company: |
chi zhou jiu hua high-go electrical & material co.ltd
|
| Contact: |
Ms. Yang Anna |
| Address: |
dunshang street office guichi district |
| Postcode: |
247121 |
| Tel: |
0086-566-4815388 |
| Fax: |
0086-566-4815985 |
| E-mail: |
|
|
|
|
Home
